 |
 |
 |
 |
| Home | About Us | Contact Us | Site Map | Resource | ||||
Printer Consumables
|
Although formal ratification of a new ISO standard for testing colour printer consumables has not yet been completed, manufacturers have started to quote yield figures based on the new system - a sure indicator that the new agreed test methods will not change. Amongst manufacturers adopting the new system are Epson and Hewlett Packard, both of whom implementing it for their inkjet printer ranges. |
What is the new Colour Printer Yield Standard System?
Essentially, the new ISO system does away with the old "5% coverage" (ink on paper) maxim, and the lack of standards on testing and consumables quoting methods. These methods that consumers have been faced with the need for a great deal of guidance when attempting to calculate the Total Cost Of Ownership equation when specifying new printer installations. The ISO system is designed to ensure that yield figures quoted by printer manufacturers for the number of pages per cartridge can now be compared for machines from different manufacturers, whereas until now the figures were only really meaningful for comparisons between different printer models from the same manufacturer.
The main lines of approach with the new ISO system has been to eliminate discrepancies due to
- Different test pages used, with differing page coverage - No uniform testing method - Yields quoted in different statistical standards
Colour Printer Yield Standards- Going Forward
So now the situation has changed to some extent. The ISO 19752 standard for testing and quoting of yield for mono printing on mono laser printers already exists, and now we are on the cusp of this latest ISO standard for colour printing on colour printers (ISO 24712).
It is easy to see how the ISO standards offer a big improvement – standard test pages, standard test methodology and standard way of calculating and quoting the yield.
However, even at this stage there is the view that perhaps the new standards do not go far enough, in that the standard does not address all the issues surrounding printing of monochrome pages on colour systems.
In essence, the test programme specifies a five-page document to be printed as continuously as the paper feed of the printer allows. The 5 pages are mono letter, two data presentation pages and a block and line test pattern. The yield is quoted as the number of pages printed when the cartridge runs out.
Article Source: http://www.articletap.com
| Home | | | About Us | | | Contact Us | | | Site Map | | | Resource |